How it works
It shows up finished. You set it in place.
Build your stair. We deliver it to your home. You set it on level ground. No footings. No attachment to the house. No contractor.
The plan
Three steps from your door to done.
- 01
Inspect before you accept
Every pallet carries a sticker. Check the packaging, fascia and composite top before you sign, so any shipping damage goes back to the carrier.
- 02
Unbox with care
Pull the wrap back by hand so you don’t cut into the stair.
- 03
Lift off the landing
The top layer lifts off the base. Built-in hand holds keep your fingers clear.
- 04
Carry the base to the door
It’s lighter than concrete. Carry it into the backyard and set it against the house.
- 05
Check level, left to right
Your door threshold is level, so the stair should be too. Half an inch of slope shows up at the top step.
- 06
Shim the low side
If necessary… Patios slope for drainage. A few shims under the low side and the stair sits flat.
- 07
Stack the landing back on
Set the top layer back in place. Step outside.
What it sits on
If it’s level, it works.
What you don’t needNo footings.No attachment to the house.No vapor barrier.

